Spare Part Advice

Spare parts are supplied as Checked Usable Components, with no failure at time of supply.
Karlisle’s and the companies we represent have no control over self-fitted parts, therefore any claim for warranty on purchased parts, will be void if found to be fitted or used incorrectly.

Tube Advice

Slightly inflate tube before fitting to tyre.
Be careful not to puncture or pinch tube during fitting.
Do not use any sharp instruments.
Make sure to inflate tube to correct pressure as per manufacturers instruction booklet.

Use Silicone Spray Only

When lubricating any part of your pram, do not use a petroleum based product as these attract dirt and grit which cause excessive wear to moving parts. This can foul wheel clips making wheels hard to take off their axles.
Only use Pure Silicone Spray. Silicone spray does not attract dirt and grit.
Before applying Silicone Spray, wipe clean all axles and wheels.

Washing

Wash pram liners and fabric by hand in cool water. Soak overnight and rinse with cold water.
Do not dry in direct sunlight as this may fade the colour.
DO NOT machine wash.

 

 

Keep checking this page
as we will be constantly updating and adding.